5 Series E61 535d (M57T2) TOUR
67 61 005
Removing and installing/replacing drive with
gear (front) for actuating slide/tilt sunroof
Necessary preliminary tasks:
•
Remove complete ceiling light (front)
Unclip front roofliner trim (1) in direction of arrow.
Disconnect associated plug connections and remove front
roofliner trim (1).
Note:
Secure drive with gear for actuating slide/tilt sunroof (3) against
falling out.
Unfasten plug connection (1) and disconnect.
Release screws (2), tightening torque 54 13 1AZ
.
Note:
Screws (2) are microencapsulated.
Feed drive with gear for actuating slide/tilt sunroof (3) out of
roofliner (4) and remove.
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt
sunroof (2) exactly in gear teeth (3).
RA Removing and installing/replacing drive with gear (front) for actuating slide/ti
BMW AG - TIS
19.02.2013 19:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -