5 Series E61 535xi (N54) TOUR
Pull timing chain (1) upwards until sprocket wheel (2) engages
chain guide (3).
Install timing chain (1) and sprocket wheel (2) in this position.
Installation:
Always keep timing chain tensioned; it is possible for timing
chain (1) to jam on chain module (3).
Important!
The N54 engine requires special friction plates between the
friction surfaces.
The engine will incur damage if the plates are damaged or are
not fitted.
Friction plates (1 and 2) are clipped into place on sprocket
wheel/oil pump module.
Make sure friction plate (3) is in correct installation position.
Push on friction plate (1) without retainers.
Important!
The N54 engine requires special friction plates between the
friction surfaces.
The engine will incur damage if the plates are damaged or are
not fitted.
RA Replacing timing chain (N54)
BMW AG - TIS
19.02.2013 00:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -