5 Series E61 535xi (N54) TOUR
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
Remove transmission cross-member.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Slowly relieve tension on clutch slave cylinder otherwise air is
drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Lever out retainer (1).
Disengage shift rod (2).
Installation:
Grease shift rod.
Grease, refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
RA Removing and installing transmission (GS6-53DZ) N54 AWD
BMW AG - TIS
19.02.2013 09:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
