5 Series E61 535xi (N54) TOUR
32 41 311
Replacing suction line for power steering
(N54 AWD)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove front underbody protection
•
Remove steering gear cover at side
Version with automatic transmission:
Release bolts (1).
Remove bracket (2) for transmission oil cooler lines from front
axle carrier.
Unfasten hose clip (1).
Detach suction line (2) from vane pump; if necessary, remove
return line for power steering from front axle carrier.
Installation:
Markings (3) on suction line and vane pump connection must
match up.
RA Replacing suction line for power steering (N54 AWD)
BMW AG - TIS
19.02.2013 11:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -