5 Series E61 535xi (N54) TOUR
32 41 332
Replacing pressure line for power steering
(N54 AWD)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Lower front axle support
Release banjo bolt (1) and detach pressure line (2) from vane
pump.
Installation:
Replace all sealing rings.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
RA Replacing pressure line for power steering (N54 AWD)
BMW AG - TIS
19.02.2013 11:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -