5 Series E61 535xi (N54) TOUR
61 31 385
Removing and installing/replacing tilt sensor
for automatic rear lid actuation
Necessary preliminary tasks:
•
Remove roofliner.
Disconnect electrical plug connection (1).
Release screws (1) on cover (2) and remove cover (2).
Detach cable straps (1).
Unclip tilt sensor (2) in direction of arrow and feed out of roof.
RA Removing and installing/replacing tilt sensor for automatic rear lid actuation
BMW AG - TIS
19.02.2013 20:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -