5 Series E61 545i (N62) TOUR
Replacement:
Release screw (1).
Note:
Illustration shows (cyl. 1-4).
Grip at dihedron and release screw (1).
Convert lever (2) with roller.
Important!
Levers (2) with rollers of cylinders 1 to 4 and 5 to 8 are
different and must not be mixed up.
Note:
Spring mount (1) has a locating pin opposite screw.
Attach spring to spring mount (1).
Insert locating pin of spring mount (1) into locating bore in
cylinder head.
Install screw and tighten down.
Rotate eccentric shaft at dihedral head as illustrated in order to
reduce tension on torsion spring (1).
Pretension torsion spring (1) with a cable strap (2) and carefully
fit on roller (3).
RA Removing and installing left cylinder head (N62 to 9/03)
BMW AG - TIS
19.02.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -