5 Series E61 545i (N62) TOUR
Align special tool 11 0 346 in direction of valve shaft.
Press down valve spring on spring cap, top, and remove valve
keys.
Important!
Incorrect installation possible.
Valve springs of exhaust and inlet camshafts are different.
Incorrect installation will result in engine damage.
Note:
Valve springs for exhaust valves are approx. 4 mm longer.
1)
Valve springs of inlet valves
2)
Valve springs of exhaust valves
Important!
Incorrect installation possible.
Incorrect installation will result in valve spring breakage.
The color coding (1) is normally located on the lower end of
the valve spring.
Only the diameter is decisive for the correct installation of the
valve springs.
Install valve spring so that larger diameter points to spring
plate at bottom.
RA Replacing all valve springs (N62)
BMW AG - TIS
19.02.2013 15:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
