5 Series E61 545i (N62) TOUR
11 40 000
Checking engine oil pressure
Special tools required:
•
11 4 050
•
13 3 061
•
13 3 063
•
13 6 051
•
13 6 054
Note:
To check the engine oil pressure, the oil pressure switch must
be removed and the special tools installed and connected.
Note:
A small amount of oil will emerge when the oil pressure switch is
removed. Have a cleaning cloth ready.
Make sure no oil runs onto belt drive.
Remove any remnants of oil immediately with cleaning cloth.
Remove oil pressure switch.
Installation:
Tightening torque, 12 61 1AZ .
Install special tool 11 4 050 with sealing ring (1) in place of oil
pressure switch.
RA Checking engine oil pressure
BMW AG - TIS
19.02.2013 15:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
