5 Series E61 545i (N62) TOUR
11 78 533
Replacing right oxygen control sensor
(N62/N62TU)
Special tools required:
•
11 7 030
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Switch off ignition.
•
Remove reinforcement plate
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Release plug connector (1) and pull off.
Unclip control sensor cable.
RA Replacing right oxygen control sensor (N62/N62TU)
BMW AG - TIS
19.02.2013 15:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -