5 Series E61 545i (N62) TOUR
17 11 035
Removing and installing/replacing fan cowl
with electric fan (N62, N62TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove radiator cover
Unlock plug (1) on AUC sensor and disconnect.
Unlock connector (2) and remove.
Note:
Modify AUC sensor when replacing fan cowl.
Raise fan cowl (1) approx. 3 cm.
Note:
For purposes of clarity, this work step is shown on the fan cowl
after it has been removed.
Fold in left retaining tab (1) in direction of arrow.
RA Removing and installing/replacing fan cowl with electric fan (N62, N62TU)
BMW AG - TIS
19.02.2013 16:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
