5 Series E61 545i (N62) TOUR
Disconnect plug connection (1).
Important!
Do not bend brake lines.
Unfasten brake lines (2).
Installation:
Tightening torque 34 32 1AZ
.
Release screw (3) and remove hydraulic unit.
When replacing hydraulic unit:
Release screws (1) and convert holder (2).
RA Removing and installing/replacing hydraulic unit for DSC (M54 / N62 / N52)
BMW AG - TIS
19.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
