5 Series E61 545i (N62) TOUR
Unhook seat cover (1) in area (2).
Disconnect plug connection (3).
Remove seat cover (1) complete with support.
Version with OC3 mat:
-
OC3 mat must not be kinked under any circumstances.
Detach all retainers in side area from longitudinal wires (1).
Pull trim wires (1) forward out of seat cover.
Carefully fold back seat cover and release retainers from cross-
wires (2).
Remove seat cover from support.
Important!
Remove all remnants of clips from seat cover and support.
Detach cable strap (3).
Unlock plug connection (4) and disconnect.
Detach seat cover (2) in marked area from thigh support (1).
Support (1) with OC3 mat (2).
Important!
No retainer remainders may be fitted as well.
Handle OC3 mat with extreme care.
Do not kink OC3 mat.
Do not clamp OC3 mat.
OC3 mat must lie without folds under seat cover.
RA Removing and installing/replacing seat cover for left or right front seat (sport
BMW AG - TIS
20.02.2013 01:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -