5 Series E61 545i (N62) TOUR
67 11 555
Removing and installing/replacing servodrive
for tank filler flap
Necessary preliminary tasks:
•
Remove right luggage compartment wheel arch trim
•
Disconnect battery negative lead
Slacken screws (1) and feed servodrive for tank filler flap (2)
with retaining mount towards rear.
Unfasten plug connection (3) and disconnect.
Replacement:
Unclip tank filler flap Bowden cable (1) in direction of arrow from
servodrive for tank filler flap (4).
Installation:
Make sure emergency release pull strap (2) is in correct
installation position.
Release screws (3).
Remove servodrive for tank filler flap (4) from retaining mount.
Installation:
Carry out adjustment of servodrive for tank filler flap (4) via
elongated holes (5). It must be possible to lock or unlock the fuel
filler flap completely.
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
20.02.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -