6 Series 630i (N52) Coupe
11 36 046
Removing and installing/replacing inlet and
exhaust adjustment units (N52)
Special tools required:
•
11 4 280
•
11 4 281
•
11 4 282
•
11 4 283
Necessary preliminary tasks:
•
Remove cylinder head cover.
Important!
To open central bolts on adjustment units and camshafts.
Fit special tool 11 4 280 .
Fit special tool 11 4 283 with screws (1).
Fit special tool 11 4 281 on special tool 11 4 283 .
Important!
Special tool 11 4 282 must be fitted underneath on inlet
camshaft.
Release chain tensioner (2).
Tightening torque: 11 31 5AZ
.
Release central bolt on inlet/exhaust adjustment units (1).
Tightening torque: 11 36 1AZ
.
RA Removing and installing/replacing inlet and exhaust adjustment units (N52)
BMW AG - TIS
15.01.2013 12:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -