6 Series 630i (N52) Coupe
11 41 010
Removing and installing/replacing chain
module for oil pump/vacuum pump (N52)
Special tools required:
•
11 0 290
•
11 0 300
•
11 4 120
•
11 4 280
•
11 4 360
•
11 4 362
•
11 4 440
•
11 5 200
•
11 9 280
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Remove cylinder head cover.
•
Remove engine oil sump.
•
Remove drive belt.
•
Remove tensioner for drive belt.
•
Remove vibration damper at front.
•
Remove sealing cover for vacuum pump.
RA Removing and installing/replacing chain module for oil pump/vacuum pump (N52)
BMW AG - TIS
15.01.2013 12:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -