6 Series 630i (N52) Coupe
16 14 017
Removing and installing/replacing fuel filter
with fuel level sensor
Special tools required:
•
16 1 020
Recycling
Fuel escapes when fuel lines are detached. Have a suitable
collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Important!
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Ensure absolute cleanliness when working on the open fuel
tank.
Contaminants in the fuel tank can impair driving operation or
may even result in vehicle breakdown!
Before starting the engine for the first time:
•
Fill fuel tank with at least 5 litres of fuel.
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove rear seat bench
After completing work:
•
Check repumping function of suction-jet pump
RA Removing and installing/replacing fuel filter with fuel level sensor
BMW AG - TIS
15.01.2013 13:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -