6 Series 630i (N52) Coupe
21 00 006
Bleeding clutch hydraulic system
Special tools required:
•
21 5 030
Necessary preliminary tasks:
•
Remove transmission underbody protection if necessary.
•
Remove microfilter housing is necessary.
Important!
From 08.06 a plastic clutch slave cylinder is installed in the
E8X, E9X.
Important notes on installation are described in this work step.
Unfasten nuts and remove clutch slave cylinder (pressure line
remains connected).
RA Bleeding clutch hydraulic system
BMW AG - TIS
15.01.2013 13:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -