6 Series 630i (N52) Coupe
Insert special tool 21 2 180 in clutch.
Press special tool 21 2 180 together at handles (1) as far as it
will go and tighten down knurled screws (2).
Adjustment ring of clutch is now secured in its original position
(wear position).
Note:
Locking hooks (1) of special tool 21 2 180 must engage in
openings of pressure spring.
Fit special tool 21 2 170 and tighten down at knurled screw (1).
Screw in spindle (2) until diaphragm spring (3) is tensioned on
stop.
Note:
Insert special tool 21 2 170 only in area of bores for dowel
pins.
RA Removing and installing/replacing clutch (SAC)
BMW AG - TIS
15.01.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -