6 Series 630i (N52) Coupe
Longitudinal adjustment without dismantling door trim panel:
Necessary preliminary tasks:
•
Remove cover from outside door handle
Ideal adjustment:
Distance (A) of trim (2) to door window glass (1):
Measurement (A) = 10
±
0.5 mm
Note:
If necessary, check that trim (2) is correctly seated on door
window (3).
When door window glass (1) is closed, rear edge of glass must
rest against moulded corner (2) of cavity seal (3).
Lever out cover (1) in direction of arrow.
Note:
Close door window glass completely so that screw (2) can be
reached.
Slacken screw (2) in clockwise direction and carry out
longitudinal adjustment by moving door window glass (3).
Installation:
Tightening torque 51 32 2AZ
.
RA Adjusting left or right front door window glass
BMW AG - TIS
15.01.2013 17:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -