6 Series 630i (N52) Coupe
51 43 148
Removing and installing or replacing trim on
left or right door pillar (top)
Special tools required:
•
00 9 317
Lever out cap (1).
Release screw (2) and detach seatbelt strap (5).
Tightening torque 72 11 4AZ
.
Partially loosen edge protection (1).
Unclip clips (2) of panel (3) with special tool 00 9 317 in
direction of arrow.
Feed out seatbelt strap (4) and remove panel (3).
Installation:
Clips (1) of panel (2) must not be damaged.
RA Removing and installing or replacing trim on left or right door pillar (top)
BMW AG - TIS
15.01.2013 17:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -