6 Series 630i (N52) Coupe
61 71 100
Removing and installing/replacing
windscreen washer pump
Necessary preliminary tasks:
•
If necessary, remove left front wheel
•
Remove front underbody protection
Note:
For purposes of clarity, illustration shows front wheel removed.
Release screws.
Fold back wheel arch trim (1) in direction of arrow.
Note:
Catch any escaping washer fluid if necessary.
Disconnect plug connection (1).
Detach hose (2) from windscreen washer pump (3).
Pull windscreen washer pump (3) in direction of arrow out of fluid
reservoir for windscreen washer unit (4).
Installation:
•
Replace strainer for windscreen washer pump.
•
If necessary, coat sealing ring of windscreen washer pump
with antiseize agent.
•
Ensure hose is laid without kinks.
•
Fill fluid reservoir
RA Removing and installing/replacing windscreen washer pump
BMW AG - TIS
15.01.2013 20:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -