6 Series 630i (N52K) Coupe
With 1st cylinder in firing TDC position, cams of inlet
camshaft (1) at 1st cylinder point upwards at an angle.
The timings are correct when the part numbers (2) on the inlet
and exhaust camshafts (1) point upwards.
With 1st cylinder in firing TDC position, cams of exhaust
camshaft (3) at 6th cylinder point downwards at an angle.
Cam follower (1) is not actuated.
Note:
When the engine is installed, the position of the exhaust
camshaft (3) for the timing can only be checked with a mirror.
Secure special tool 11 4 283 to cylinder head with bolts (1).
Note:
Fit special tool 11 4 282 underneath on side of inlet camshaft.
Mount special tool 11 4 281 on inlet and exhaust camshafts.
RA Checking timing of camshaft(s) (N52K)
BMW AG - TIS
16.01.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -