6 Series 630i (N52K) Coupe
Note:
Removing special tool kit 13 5 220 :
-
Switch off engine
-
Screw out check valve fully again.
-
Remove special tool kit 13 5 220 from pressure regulator
housing.
-
Catch and dispose of escaping fuel.
Note:
Read out fault memory of DME control unit.
Check stored fault messages.
Now clear the fault memory.
RA Checking fuel pump delivery pressure (N52)
BMW AG - TIS
16.01.2013 14:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -