6 Series 630i (N52K) Coupe
17 11 046
Removing and installing / replacing module
carrier
Necessary preliminary tasks:
•
Remove radiator cover
•
Remove fan cowl with electric fan
•
Drain coolant
•
Remove radiator
•
Draw off fluid from power steering
Installation:
Bleed power steering unit
•
Unlock hydraulic lines on cooling loop and disconnect
•
Secure A/C condenser against damage and against falling
down.
Press lock (1) and remove holder (2) downwards.
Illustration shows the left holder: The same procedure applies to
the opposite side.
Installation:
Rubber mounts fall out easily, ensure correct installation position.
Remove module carrier (1) towards bottom.
RA Removing and installing / replacing module carrier
BMW AG - TIS
16.01.2013 15:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -