6 Series 630i (N52K) Coupe
17 11 100
Removing and installing/replacing coolant
expansion tank (M54, N52, N54, N46T)
Necessary preliminary tasks:
•
Drain coolant from radiator
Release and disconnect coolant hoses (1).
Release screws.
Raise expansion tank, unlock plug on coolant level switch and
disconnect.
Remove coolant expansion tank (2).
Installation:
Insert locating pin in rubber grommet.
Check cooling system for leaks.
RA Removing and installing/replacing coolant expansion tank (M54, N52, N54, N46T)
BMW AG - TIS
16.01.2013 15:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -