6 Series 630i (N52K) Coupe
51 47 491
Removing and installing/replacing rear
underbody protection
Necessary preliminary tasks:
•
Remove front underbody protection
Release screws (1).
Press heat shield to one side.
Release screws (2) and remove rear underbody protection (3).
Installation:
Center rear underbody protection (3), secure with screws (2)
and then insert screws (1).
RA Removing and installing/replacing rear underbody protection
BMW AG - TIS
16.01.2013 15:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -