6 Series 630i (N52K) Coupe
31 12 080
Removing and installing/replacing both
tension struts
Necessary preliminary tasks:
•
Remove front wheel
•
Remove front assembly underside protection
•
Remove steering gear cover at side
•
If necessary, remove wheel suspension cover
Release nuts (1) and pull out screw (3).
Installation:
Replace self-locking nut.
Tighten bolt connection in normal position.
Tightening torque 31 12 1AZ
.
Release nut (2); if necessary, grip at Torx socket.
Turn swivel bearing a little and remove tension strut.
Installation:
Keep tension strut to swivel bearing connection clean and free
from oil and grease.
Replace self-locking nut.
Tightening torque 31 12 19AZ
.
RA Removing and installing/replacing both tension struts
BMW AG - TIS
16.01.2013 15:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -