6 Series 630i (N52K) Coupe
51 71 373
Removing and installing/replacing tension
strut on spring strut dome
Important!
Vehicles must not be driven without tension struts.
Driving without tension struts will result in bodywork damage.
Necessary preliminary tasks:
•
Remove lower microfilter housing section on left/right
If necessary, remove cover on spring strut dome on left/right:
-
Release expander rivets (1).
-
Remove cover (3),
-
taking care not to damage retaining lug (2)
If necessary, remove tension strut panels:
-
Release expander rivets on panel (2)
-
Remove panel (2) in direction of arrow
RA Removing and installing/replacing tension strut on spring strut dome
BMW AG - TIS
16.01.2013 16:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -