6 Series 630i (N52K) Coupe
32 41 061
Replacing power steering vane pump
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Remove vane pump
Release screws (1) and remove belt pulley (2).
Installation:
Lettering on belt pulley (2) points forwards.
Tightening torque 32 41 14AZ
.
RA Replacing power steering vane pump
BMW AG - TIS
16.01.2013 16:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -