6 Series 630i (N52K) Coupe
Spot-drill rivets in area (1) from protruding rear side or grind and
punch through.
Open rivet joints in areas (1) to (3).
Installation:
Use 5 rivets (size 13) in area (1).
Use 4 rivets (size 13) in area (2).
Use 3 rivets (size 13) in area (3).
Use 4 rivets (size 13) in area (4).
Use 7 rivets (size 13) in area (5).
Open rivet joints in areas (1) and (2).
As a rule, part of the punch rivet remains in the rear engine carrier
in area (2). Do not drill out remnants. Set blind rivets next to
punch rivets.
Open weld joint in area (1).
Installation:
Use 4 rivets (size 13) in area (1).
Use 5 rivets (size 13) in area (2).
Use 6 rivets (size 13) in area (3).
Install 2 EMC screws in area (1).
Open rivet joints in area (1).
Installation:
Use 3 rivets (size 13) in area (1).
Use 6 rivets (size 13) in area (2).
Use 1 rivet (size 13) in area (3).
Install 2 EMC screws in area (2).
Drill holes for rivets.
RA Replacing front section of left engine support
BMW AG - TIS
16.01.2013 18:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -