6 Series 630i (N52K) Coupe
41 35 101
Replacing rear left side panel
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 35 101).
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Side panel, rear
Mark severance cuts in accordance with specified measurements and cut.
RA Replacing rear left side panel
BMW AG - TIS
16.01.2013 18:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -