6 Series 630i (N52K) Coupe
Open weld joints in areas (1).
Installation:
Insert reinforcement plate at severance cut.
Open weld joints in areas (1).
Installation:
Apply window glass adhesive to cavity acoustic baffle in area (2).
Cut wheel arch along line (1).
Installation:
Adjust new part in conjunction with side panel to fit.
Attach new component from outside and plug weld.
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
16.01.2013 18:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -