6 Series 630i (N52K) Coupe
Installation:
Catches (1) and guide (2) on trim (3) must not be damaged.
Release screws (1) on bumper trim (2).
Release screws (1) on wheel arch trim (2).
Important!
To avoid damage, unclip the bumper trim (1) in direction of
travel.
Pull bumper trim (1) in direction of arrow off side guide.
RA Removing and installing front bumper trim
BMW AG - TIS
16.01.2013 18:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -