6 Series 630i (N52K) Coupe
Release screws (1) on storage compartment (2).
Release screws (1) on instrument panel (2).
Release screw (1) on transmission tunnel (2).
Unclip gaiter (1) upwards with special tool 00 9 317 .
Raise storage compartment (2) and if necessary disconnect plug
connections from below.
Feed out storage compartment (2) past gaiter (1) and remove
towards top rear.
RA Removing and installing storage compartment
BMW AG - TIS
16.01.2013 19:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -