6 Series 630i (N52K) Coupe
51 16 210
Removing and installing/replacing Sport
switch trim (SPORT button)
Special tools required:
•
00 9 341
Unclip trim for Sport switch (1) with special tool 00 9 341 from
fastening points (3).
Warning!
When using the special tool, make sure that the decorative
trims are not damaged.
Pull back trim (1) and unclip gaiter (2) from below at fastening
points (3).
Feed out trim (1) upwards over gaiter (2), disconnect associated
plug connections and lift out trim (1).
Installation:
Make sure retainers (1) are correctly seated in appropriate
mounts of trim for preselector lever (2).
Replacement:
If necessary, remove driving dynamics switch.
RA Removing and installing/replacing Sport switch trim (SPORT button)
BMW AG - TIS
16.01.2013 19:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -