6 Series 630i (N52K) Coupe
51 24 146
Removing and installing/replacing button for
rear lid actuation
Necessary preliminary tasks:
•
Remove panel for rear lid
Unclip Bowden cable (1) and feed in direction of arrow out of
mounting.
Version with manual rear lid unlocking:
Detach Bowden cable (2) in direction of arrow from button (3).
Disconnect plug connection (1) at microswitch.
Slacken screws (2)
Turn retaining ring (3) in direction of arrow and remove.
Remove button (1) in direction of arrow from rear lid (2).
RA Removing and installing/replacing button for rear lid actuation
BMW AG - TIS
16.01.2013 19:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -