bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

31 Front And Rear Window > < 5 RA Removing And Installing_replacing Side Left Or Right Buffer Stops On Rear Lid
Page 1
background image

51 24 300

Removing and installing or replacing left or
right gas strut for trunk lid

Necessary preliminary tasks:

Remove luggage compartment wheel arch trim

Important!

When working on the rear gas struts, there is a risk of
paintwork damage in areas (A and B) of rear lid (1) and
side panels (2).

Open and close carefully.

If necessary, remove rear lid.

Lever out both retaining springs (1).

Lever out gas strut (2) from ball pins of side panel and rear lid
hinge (3) and remove.

RA  Removing and installing or replacing left or right gas strut for trunk lid

BMW AG - TIS

16.01.2013  19:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

31 Front And Rear Window > < 5 RA Removing And Installing_replacing Side Left Or Right Buffer Stops On Rear Lid