6 Series 630i (N52K) Coupe
Press on point (A) and tilt out cover (1).
Important!
Cover (1) must not drop into side air duct of door trim panel.
Release screw (2) underneath.
Tightening torque 51 41 4AZ
.
Release screws (1) on door trim panel (3).
Unclip LED for inner door compartment (2).
Note:
Start unclipping at bottom.
Unclip clips (1) for door trim panel (2) with special tool
00 9 317 .
Carefully unclip door trim panel (1) at top from retainers (2).
RA Removing and installing left or right front door trim panel
BMW AG - TIS
16.01.2013 19:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -