6 Series 630i (N52K) Coupe
51 43 002
Removing and installing rear left or right side
trim panel
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove entrance cover strip
•
Partially detach backrest for rear seat
•
Remove panel for door pillar
•
Remove trim on armrest of side trim panel
Release screws (1).
Detach mucket (2) on side trim panel (3).
Unclip clips (1) with special tool 00 9 317 .
Carefully unclip side trim panel (3) at top from retainers (2).
Remove side trim panel (3) towards inside.
RA Removing and installing rear left or right side trim panel
BMW AG - TIS
16.01.2013 19:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -