6 Series 630i (N52K) Coupe
Note:
Position of butylene tape (1) on inner door panel is identified by
center punch marks.
Important!
Do not damage Bowden cable (2) and lock knob control
rod (3).
Note:
Position of butylene tape (1) on acoustic insulation (2).
Note:
A marking (2) is provided all round on the acoustic insulation (1).
Butylene tape (3) rests on or inside the marking (2).
Clean bonding area with adhesive remover (sourcing reference:
BMW Parts Service).
Air drying time: 1 minute
Important!
Adhesive area must be dry and free from dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
16.01.2013 19:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -