6 Series 630i (N52K) Coupe
Release screws (1) and remove retaining plates (2).
Installation:
Tightening torque 52 10 9AZ
.
Unhook cable (1) from holder (2).
Turn seat pan (1) upwards.
Detach flex mat (2) at rear from mounts (3).
Detach seat pan (1) on left and right towards rear/top from
mount (2) and remove.
RA Removing and installing/replacing seat pan and flex mat on left or right front s
BMW AG - TIS
16.01.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -