6 Series 630i (N52K) Coupe
54 10 004
Adjusting glass tilt sunroof lid
Special tools required:
•
00 9 315
•
00 9 341
Necessary preliminary tasks:
•
Remove gaiter on left and right
•
Close glass tilt sunroof lid completely
•
Check glass tilt sunroof for correct adjustment
Gap adjustment only:
•
Remove roofliner
If the glass tilt sunroof is outside the adjustment tolerances, adjust
as follows:
Height adjustment:
Carry out the following step on one side first and then the other
(left, right or vice versa):
•
Slacken Torx screws (1) on left/right so that sunroof lid (2)
can still just be adjusted.
•
Move sunroof lid as required.
•
Make sure all screws are tightened down.
•
Tightening torque 54 10 5AZ
.
•
Repeat work steps on the other side.
Checking height:
Check height of glass lid (1) in relation to body (2) with special
tool 00 9 315 .
Press glass lid (1) at front and rear towards top or bottom until
ideal position is reached.
Height:
•
Front - glass lid flush to 2 mm lower
•
Rear - glass lid flush to 2 mm higher
Check function and adjustment.
RA Adjusting glass tilt sunroof lid
BMW AG - TIS
16.01.2013 20:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -