6 Series 630i (N52K) Coupe
61 31 270
Replacing switch for reversing light
Note:
The installation location of the reversing light switch can vary,
depending on the transmission model.
Necessary preliminary tasks:
•
If necessary, remove rear underbody protection
Version A:
Disconnect plug connection (1).
Release switch for reversing light (2).
Tightening torque 61 31 2AZ
.
Version B:
Disconnect plug connection (1).
Release switch for reversing light (2).
Tightening torque 61 31 2AZ
.
RA Replacing switch for reversing light
BMW AG - TIS
16.01.2013 22:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -