6 Series 630i (N52K) Coupe
61 33 060
Removing and installing/replacing both
fanfare horns
Necessary preliminary tasks:
•
Remove front right wheel arch trim
Disconnect plug connection (1).
Release nut (2) and remove low-pitch fanfare horn (3).
Tightening torque 61 33 1AZ
.
Release nut (4) and remove high-pitch fanfare horn (5) with
retaining plate. Tightening torque 61 33 2AZ
.
Replacement:
If necessary, remove retaining plate from high-pitch fanfare horn.
Release nut on high-pitch fanfare horn. Tightening torque
61 33 1AZ
.
Remove retaining plate from high-pitch fanfare horn.
RA Removing and installing/replacing both fanfare horns
BMW AG - TIS
16.01.2013 22:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -