6 Series 630i (N52K) Coupe
84 10 050
Removing and installing (replacing) USB hub
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove hands-free charging electronics (High)
Release nuts (1) and remove holder (2) with USB hub (3) from
body.
Disconnect plug connection (1).
Unscrew nuts (2).
Remove USB hub (3) from holder (4).
Installation:
Make sure wiring harnesses are correctly routed.
RA Removing and installing (replacing) USB hub
BMW AG - TIS
16.01.2013 22:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -