6 Series 630i (N52K) Coupe
61 35 285
Removing and installing (replacing) light
module
Important!
Read and comply with notes on protection against
electrostatic discharge (ESD protection).
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
Unlock catch (1) and feed out/remove light module (2) in
direction of arrow.
Installation:
Make sure light module (2) is correctly seated in mounting (3)
and catch (1).
If necessary, unlock catch (1) and remove cover (2) from light
module (3).
Installation:
Make sure cover (2) is correctly seated on light module (3).
RA Removing and installing (replacing) light module
BMW AG - TIS
16.01.2013 22:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -