6 Series 630i (N52K) Coupe
61 67 200
Removing and installing/replacing spray
nozzle for night vision camera
Special tools required:
•
13 3 010
Necessary preliminary tasks:
•
Remove front bumper trim
To prevent excess escape of washer fluid, seal off end of high-
pressure line with special tool 13 3 010 .
Note:
Night vision camera removed for purposes of clarity.
Press retainer (1) and detach high-pressure line (2) from high-
pressure nozzle.
RA Removing and installing/replacing spray nozzle for night vision camera
BMW AG - TIS
16.01.2013 22:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -