6 Series 630i (N52K) Coupe
63 21 055
Replacing a socket housing for left or right
rear light (on side panel) (up to 09/2007)
Warning!
Follow instructions for handling light bulbs (exterior lights).
Unclip cover (1) in direction of arrow and remove.
Turn socket housing for rear light (1) in direction of arrow and
remove from rear light (2).
Cut associated wiring harness with sufficient residual length
remaining in vehicle and remove socket housing for rear light (1).
Installation:
If necessary, remove bulb.
Wiring is carried out with connectors.
Wrap wiring harness in insulating tape and secure against rattling.
Make sure socket housing for rear light (1) is correctly engaged
and seated on rear light (2).
RA Replacing a socket housing for left or right rear light (on side panel) (up to 0
BMW AG - TIS
16.01.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -