6 Series 630i (N52K) Coupe
63 21 057
Replacing a socket housing for left or right
rear light (on bumper trim) (up to 09/2007)
Warning!
Follow instructions for handling light bulbs (exterior lights).
Necessary preliminary tasks:
•
Remove bumper trim
Turn socket housing for rear light (1) or (2) and remove from
rear light (3).
1.
Socket housing of bulb for rear fog light
2.
Socket housing of bulb for reversing light
Cut associated wiring harness with sufficient residual length
remaining in vehicle and remove socket housing for rear light (1)
or (2).
Installation:
If necessary, remove bulb.
Wiring is carried out with connectors.
Wrap wiring harness in insulating tape.
Make sure wiring harness is correctly laid.
Make sure socket housing for rear light is correctly engaged and
seated on rear light.
RA Replacing a socket housing for left or right rear light (on bumper trim) (up to
BMW AG - TIS
16.01.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -